|
S60 & V60 '18> / XC60 '17> / S90 & V90 '16> / XC90 '15> General Forum for the SPA-platform 60- and 90-series models |
![]() |
|
V60 - power tailgate sinks a few inches after openingViews : 17820 Replies : 92Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#81 |
Junior Member
Last Online: Yesterday 19:47
Join Date: Oct 2019
Location: exeter
|
![]()
Not sure if anything can be done if the spring's broken though?
|
![]() |
![]() |
![]() |
#82 |
Junior Member
Last Online: Yesterday 19:47
Join Date: Oct 2019
Location: exeter
|
![]()
Hmm. No pics. Try again!
|
![]() |
![]() |
![]() |
#83 |
New Member
Last Online: Jul 8th, 2024 16:23
Join Date: Mar 2023
Location: Fleet
|
![]()
Hi Redfazer
I would preferred to do a PM on this subject as it is a pressurised system. Unfortunately I don’t qualify under the forum rules currently. - These are my actions and I am not instructing anybody to follow them. - That’s a similar mechanically to the strut as the one fitted to my vehicle, just that I have no ink stamp on the casings, but raised moulded plastic writing with a few less identities. If you have a look at the lower end of the strut and see if there is play in the end of the strut see JG81 post 38 photo which may identify which strut is the weakest. Back in October my R/H strut failed and I had a look. My process was :- - Insert Broom handle into boot first, on the other strut to boot tie down point- 1, remove the bottom strut from the car body, Care here, as the alloy forging is weak and may break behind the retaining spring, and refitting. 2, carefully slide back the top plastic weather seal (in your photo 5624) its shrink wrapped so just spin it off and try not to stretch it. 3. Top of the strut you will see two clips holding the outer casing in place disconnect and slide the casing down the inner casing and off the end you have disconnected. 4 the lower casing may or may not come off dependent upon the spring force acting on it, but it is withdrawn in the same way. See JG81 post 38 photo which shows the seals, if it doesn’t move, don’t force it. - Once you have got the casing off, there not much you can do with the spring, apart from using Swan neck pliers to reposition the broken spring where it gets forced over itself in operation. Clearly all you are doing at this stage is resetting the strut to fail again, but on my 2nd /3rd visit I used Cable Ties 100mm x 2.5 https://www.toolstation.com/cable-ties-black/p28946 three per spring break, and it has improved the spring action. You need to buy the real small ones as the clearance in the casing is tight. Happy hunting for a new strut! |
![]() |
![]() |
The Following User Says Thank You to Number 6 For This Useful Post: |
![]() |
#84 |
New Member
Last Online: Jul 8th, 2024 20:51
Join Date: Aug 2019
Location: CUPAR
|
![]()
I e mailed volvo and they said it needs to go in to be checked. Then they will decide about goodwill. The car is 2019. About 8 months out of the one year warranty I got when I bought the car from Volvo. Any ideas about if and how much they might be willing to contribute? Has anyone else gone through this process?
I considered an e mail to dvsa but not sure if it's worth the hassle yet. Thanks all |
![]() |
![]() |
![]() |
#85 | |
Junior Member
Last Online: Yesterday 19:47
Join Date: Oct 2019
Location: exeter
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#86 | |
New Member
Last Online: Jul 8th, 2024 20:51
Join Date: Aug 2019
Location: CUPAR
|
![]() Quote:
Took about two weeks for a reply though which is unlike them. Maybe if all those affected e mail them they might take note....but maybe not of course. There's also a chat option. |
|
![]() |
![]() |
The Following User Says Thank You to PUFFLING For This Useful Post: |
![]() |
#87 |
Junior Member
Last Online: Yesterday 19:47
Join Date: Oct 2019
Location: exeter
|
![]()
Well, got the expected p1ss off reply!
I've replied telling them I'll buy my next car from a manufacturer that offers a 7 years warranty! Really not impressed. |
![]() |
![]() |
![]() |
#88 |
New Member
Last Online: Jul 8th, 2024 20:51
Join Date: Aug 2019
Location: CUPAR
|
![]()
That seems harsh. At least they suggested to me I take it in to the dealer. I contacted DVSA. Not interested.
|
![]() |
![]() |
![]() |
#89 |
Junior Member
Last Online: Yesterday 19:47
Join Date: Oct 2019
Location: exeter
|
![]()
They did suggest taking it to the dealer, but I can't see what that would achieve. I guess I could give them a ring.
|
![]() |
![]() |
![]() |
#90 |
New Member
Last Online: Jul 8th, 2024 20:51
Join Date: Aug 2019
Location: CUPAR
|
![]()
I will end up taking it in....although it involves paying a diagnostic fee! See what goodwill they might offer.
|
![]() |
![]() |
![]() |
Tags |
pump, sinks, struts, tailgate, v60 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|