|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
![]() |
|
Volvo troubles with limp mode, ECM 1000 and ECM 1600Views : 761 Replies : 2Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Volvo xc90 2007 d5
Last Online: Jun 2nd, 2024 20:39
Join Date: Jan 2021
Location: Auckland
|
![]()
Hi guys any help on what to look will be amazing.
Each time I start the car shows "Engine system service required" even when I clean the codes and when I connect Vida these are the errors that shows me: ECM-1000 Atmospheric Pressure Sensor - Faulty Signal ECM-1600 Boost Pressure Sensor - Signal outside its permitted range If I drive for a while will be a point that enter in limp mode. |
![]() |
![]() |
![]() |
#2 |
New Member
Last Online: Jun 2nd, 2024 10:03
Join Date: Jan 2024
Location: CHESTER
|
![]()
Hi did you ever resolve this?
|
![]() |
![]() |
![]() |
#3 |
Volvo xc90 2007 d5
Last Online: Jun 2nd, 2024 20:39
Join Date: Jan 2021
Location: Auckland
|
![]()
I fixed it after a lot of research.
The problem was that both RESONATOR seals to top and bottom were broken to the point that was not holding the resonator. I changed the resonator (not to easy work but possible if you are a handyman) for an OEM one (basically a piece of rubber pipe like the radiator ones without needing seals like the original) from Ebay and after a cleaning with Vida and a couple of driving and cleaning with vida in the motorway everything when to normal, that was a year ago and still good. I think that I manually cleaned the EGR too in that time. |
![]() |
![]() |
The Following User Says Thank You to Indyjo For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|