|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
![]() |
|
Help! 2006 V50Views : 1193 Replies : 7Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Jan 3rd, 2014 08:46
Join Date: Jan 2014
Location: Elgin
|
![]()
Hello! Help...
Just changed low beam bulb (passenger side) and now the car won't start! Removed new bulb, still won't start... ![]() |
![]() |
![]() |
![]() |
#2 |
VOC Member
Last Online: Feb 26th, 2016 19:58
Join Date: Aug 2011
Location: Exmouth
|
![]()
I'd disconnect the battery leave it 30min and then re-connect. Just make sure by the time you go to re-connect you have finished replacing the bulb and plugged in the electrical connections again.
My guess is you had the key in the ignition and the ignition turned on when you've disconnected and re-connected the headlight loom? These cars really hate electrical stuff being disconnected or connected on a live system, always turn ignition off and disconnect battery for almost anything electrical on these cars. Top tip, also ensure you have removed the key and you have it on your person and if possible have a window down too before you re-connect the battery. These cars also have a habit of auto locking when power is applied and you don't want to lock the key inside. ![]() |
![]() |
![]() |
The Following User Says Thank You to SonyVaio For This Useful Post: |
![]() |
#3 |
New Member
Last Online: Jan 3rd, 2014 08:46
Join Date: Jan 2014
Location: Elgin
|
![]()
Cheers, will let you know how I get on!!
![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
Last Online: Jun 26th, 2016 19:23
Join Date: Jan 2012
Location: Livingston
|
![]()
When you put you're key in the ignition and turn to start position try wiggling the key it might just be a faulty ignition switch and it's a coincidence it's happened since you changed the bulb? Good luck?!
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Last Online: Nov 20th, 2015 21:14
Join Date: May 2012
Location: Lossiemouth
|
![]()
You have had a look at the fuses haven't you?
__________________
Current: Ex Plod 2000 V70 2.5TDI Mk 2 Previous: 1999 V70 SE 2.4t Mk 1 |
![]() |
![]() |
![]() |
#6 |
New Member
Last Online: Jan 3rd, 2014 08:46
Join Date: Jan 2014
Location: Elgin
|
![]()
No joy...
![]() |
![]() |
![]() |
![]() |
#7 |
New Member
Last Online: Jan 18th, 2014 18:50
Join Date: Dec 2013
Location: Gerrards cross
|
![]()
Have you tried a different key?
Sometimes if the key is in when you change any electrical component it can lose its coding it's very common on Hondas but I dont know about volvos |
![]() |
![]() |
![]() |
#8 |
VOC Member
Last Online: Feb 26th, 2016 19:58
Join Date: Aug 2011
Location: Exmouth
|
![]()
What are you getting in terms of lights on the dash when you turn the ignition on?
Do all the normal lights come on and go out okay? Is there any other message in the DIM? You may need to press the READ button on the end of the stalk to show you a 2nd or 3rd message. As above try the 2nd key and as UMT says above it may be a complete coincidence and the ignition switch may be at fault as it is a common problem. ![]() |
![]() |
![]() |
![]() |
Tags |
bulb, electrics, start |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|