|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
![]() |
|
Tailgate lock mechanismViews : 1028 Replies : 4Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Last Online: Today 14:48
Join Date: Mar 2011
Location: Edinburgh-ish
|
![]()
Hi, I noticed that on locking the car (2005 XC90), the tailgate (boot lid) wasn't locking, and could just be opened as normal (setting off the alarm). I could hear something trying to activate, so followed a previous guide about removing the rear trim to get at the wiper motor, and instead removed the locking mechanism.
In case it helps someone else, here are some photos I took. In the end I just moved the sliding bits by hand and re-greased the sliding bits and it seems to be working again (for how long?), at least it is fairly easy to get to. One thing to note, is that once you have the lock out, you don't need to unscrew anything on the actual lock, even though there's some tempting torx screws, you "just" need to unhook the black plastic tabs (indicated on the photos) to remove the metal plate that is covering the mechanism. The tab on the top was the toughest one. I think I levered the metal tab up and over the plastic bit, though that is resisted by another couple of bits of plastic trying to keep the metal tab down. Neil PS remember to remove the cable from the rear handle before trying to remove the lock from the tailgate. PPS when I reinstalled the lock, I used the old rust/scratch marks as a guide when putting the bolts back. There's a bit of movement possible, and I guess if you were way off, then it wouldn't engage in the catch in the lower boot lid. Last edited by spiralarms; Jul 16th, 2023 at 22:47. |
![]() |
![]() |
The Following 5 Users Say Thank You to spiralarms For This Useful Post: |
![]() |
#2 |
Senior Member
Last Online: Jun 17th, 2024 20:51
Join Date: Jan 1970
Location: ipswich
|
![]()
That's really helpful thank you. I've got the lock box out and taken off the first metal plate. Now I have to take the other cover off to get to see inside.
|
![]() |
![]() |
![]() |
#3 | |
Junior Member
Last Online: Today 14:48
Join Date: Mar 2011
Location: Edinburgh-ish
|
![]() Quote:
Good luck. Neil |
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Last Online: Jun 17th, 2024 20:51
Join Date: Jan 1970
Location: ipswich
|
![]()
At last got the black metal cover off and in there. Mines identical 2006.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Last Online: Jun 17th, 2024 20:51
Join Date: Jan 1970
Location: ipswich
|
![]()
Sitting at the dining room table I've got the lock moving to and fro. I'll lightly oil sliding parts tomorrow and then reassembling should be fun.
|
![]() |
![]() |
![]() |
Tags |
lock, tailgate |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|