|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
![]() |
|
V70 Gear knob removalViews : 2027 Replies : 24Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Premier Member
Last Online: Jul 26th, 2024 09:52
Join Date: Sep 2015
Location: London
|
![]()
Good afternoon chaps
Invested in the Volvo tool for the job, heated the cockpit up in today’s sunshine, gaitor removed, smaller diameter bore part of the tool under the plastic clips but she will not move for love or money Any guidance much appreciated |
![]() |
![]() |
![]() |
#2 |
Premier Member
Last Online: Sep 14th, 2022 17:04
Join Date: Jan 2018
Location: Derbyshire
|
![]()
It requires an awful lot of force to get going. Also ensure the tool is inserted as far as you can get it in. Once in I'd suggest pulling the knob as opposed to trying to push up on the tool if that makes sense.
__________________
1995 Volvo 850 T5 Estate (Manual) |
![]() |
![]() |
![]() |
#3 |
Premier Member
Last Online: Jul 26th, 2024 09:52
Join Date: Sep 2015
Location: London
|
![]()
Cooks how are you amigo ?
Makes perfect sense - as much as not breaking those damn clips - which I am keen to avoid ! Why is it so damn tight ? |
![]() |
![]() |
![]() |
#4 |
Premier Member
Last Online: Sep 14th, 2022 17:04
Join Date: Jan 2018
Location: Derbyshire
|
![]()
I'm just sitting as a passenger whilst my brain cells commit suicide one by one, thanks to a complete lack of stimuli. Worth it in the long term. Yourself?
I believe it's tight as the two fuse slightly over time (any oils, seat, debris, etc), aided by contraction of the plastic as it fits through heat cycles.
__________________
1995 Volvo 850 T5 Estate (Manual) |
![]() |
![]() |
![]() |
#5 |
Premier Member
Last Online: Jul 26th, 2024 09:52
Join Date: Sep 2015
Location: London
|
![]()
Hanging in there buddy hanging in
Tried her again this afternoon and no joy, reckon I shall be asking for help from a second pair of hands in next day or two. Orange leather is due to arrive tomorrow so I am rather keen ! Getting a decent amount of interest in my T5 as well, I know she has a shoddy exterior but I would like to see her go t9ba good home, absolutely confident there are a few years in her yet All the best |
![]() |
![]() |
The Following User Says Thank You to Bigfella666 For This Useful Post: |
![]() |
#6 |
Premier Member
Last Online: Jul 26th, 2024 09:52
Join Date: Sep 2015
Location: London
|
![]()
Hi ya Cooks
Tried again with second pair of hands and no joy Is it possible to remove the gearstick shaft by popping the plastic clip on the gear assembly ?? |
![]() |
![]() |
![]() |
#7 |
Premier Member
Last Online: Jul 26th, 2024 09:52
Join Date: Sep 2015
Location: London
|
![]()
Hi ya Cooks
Tried again with second pair of hands and no joy Is it possible to remove the gearstick shaft by popping the plastic clip on the gear assembly ?? Forgot to send last message since which I have put a strap wrench on the knob as well - no movement whatsoever so I am toying with the idea somebody has taken it off previously and glued despite all sections of clip apparently in place |
![]() |
![]() |
![]() |
#8 |
Premier Member
Last Online: Sep 14th, 2022 17:04
Join Date: Jan 2018
Location: Derbyshire
|
![]()
This video shows the process to do what you're suggesting. Almost guaranteed breakage of that white plastic cage, and potential damage to the shifter bushings (cheap enough) - and after all that you still have a hard time getting the knob off.
https://www.youtube.com/watch?v=ObGUZDT6ChU Are you certain the tool is fully inserting and releasing those clips? The pics Basher popped up on the other thread show approximately how deep it needs to go to ease the clips off.
__________________
1995 Volvo 850 T5 Estate (Manual) |
![]() |
![]() |
![]() |
#9 |
Premier Member
Last Online: Jul 26th, 2024 09:52
Join Date: Sep 2015
Location: London
|
![]()
Howdy Cooks
No I am not entirely sure but I think the tool is up as far as she will go as I can see the clips spread away from the shaft at the base I will have a look again at the original post but at the mo I am under the impression somebody has taken it off before and glued her on - just does not make sense Really appreciate your input and might well remove the shaft and see if it is any easier in a vice |
![]() |
![]() |
![]() |
#10 | |
Premier Member
Last Online: Yesterday 22:15
Join Date: Jan 2011
Location: Horne (Nr. Horley)
|
![]() Quote:
![]()
__________________
Some people are like Slinkies, they serve no useful purpose but they still bring a smile to your face when you push them downstairs. |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|