|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
![]() |
|
Windscreen washer problemsViews : 691 Replies : 5Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Jul 15th, 2022 11:51
Join Date: Jul 2021
Location: Barnsley
|
![]()
I’ve got a 2012 V70 and have recently been experiencing intermittent issues with my windscreen washers. When I pull the stalk to clean my windscreen, nothing comes out of the front washers but it comes out of the back, although the front wipers will move. It is occurring more frequently so need to get it sorted asap. Any help appreciated.
|
![]() |
![]() |
![]() |
#2 |
Member
Last Online: May 2nd, 2024 21:02
Join Date: Apr 2018
Location: Newry
|
![]()
Remove nearside front wheel and arch liner. Check the bottle and all the pipes and connectors. To get at it fully you'll need to remove the bumper unfortunately.
__________________
Feb 2010 XC70 SE Lux in White. T6. |
![]() |
![]() |
![]() |
#3 | |
Premier Member
Last Online: Today 08:58
Join Date: Jul 2012
Location: Lenzie
|
![]() Quote:
![]() ![]()
__________________
V70 D5 SE Geartronic 215bhp Saville Grey 2012MY 940 LPT Manual 1996 740 SE 1990 Last edited by griston64; Jul 14th, 2022 at 22:42. |
|
![]() |
![]() |
The Following User Says Thank You to griston64 For This Useful Post: |
![]() |
#4 |
2010 V70 2.4 Manual
Last Online: Jul 1st, 2024 11:03
Join Date: Jul 2012
Location: Perth
|
![]()
Similar issue for me, I took off the "T" and "L" connectors and pulled out the little spring valve to clean. restored some spray but still weak. Bought two new connectors from volvo and replacements are straight through, no valve? Will this have an effect on anything else?
|
![]() |
![]() |
![]() |
#5 |
New Member
Last Online: Jan 9th, 2023 11:10
Join Date: Nov 2022
Location: Dublin
|
![]()
Hi Rick
Can you tell me where these delivery valves are located. Which wheel arch or are they under the bonnet? Thanks in advance. |
![]() |
![]() |
![]() |
#6 |
Pain in the backside
Last Online: Jul 6th, 2024 01:00
Join Date: Mar 2007
Location: Newport
|
![]()
They double up as hose connectors, One will be between the bonnet and the car, The other will tee off going to the other washer.
It's advisable to be really careful with the Tee as there is a little diaphragm plus spring in you can tear. I used a small piece of stiff gardeners wire to clear out the straight piece. Compressed air to clear out the nozzles (blowing from the jet back). |
![]() |
![]() |
The Following User Says Thank You to monkeh For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|