|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
![]() |
|
BrakesViews : 649 Replies : 7Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Last Online: Jul 26th, 2013 13:09
Join Date: Jul 2012
Location: telford
|
![]()
HI ALL
Been out in car the last 2 times and on both times the brakes seem to fail for about 5/10 seconds , now could be brakes need bleeding or a siezed caliper ?servo anyone Last edited by delboy62; Dec 22nd, 2012 at 22:05. |
![]() |
![]() |
![]() |
#2 |
Premier Member
Last Online: Jul 9th, 2020 20:08
Join Date: Dec 2007
Location: Halifax West yorkshire
|
![]()
When you say the braks failed do you mean the pedal went hard as in very hard to press?
If that was the case it is a common fault on the early s/v40's and it would appear the only cure is a new servo. |
![]() |
![]() |
![]() |
#3 |
Junior Member
Last Online: Jul 26th, 2013 13:09
Join Date: Jul 2012
Location: telford
|
![]()
HI
the pedal went straight down but i kept pumping and luckally they worked its phase 2 (2001 |
![]() |
![]() |
![]() |
#4 |
Premier Member
Last Online: Mar 16th, 2021 14:49
Join Date: Oct 2009
Location: Coedpoeth
|
![]() |
![]() |
![]() |
![]() |
#5 |
Premier Member
Last Online: Jul 9th, 2020 20:08
Join Date: Dec 2007
Location: Halifax West yorkshire
|
![]()
check the brake pipes inthe rear wheel arches (common muck collecting /corrosion point) if no obvious signs of leakage and fluid level is normal suspect master cylinder seal failed.
|
![]() |
![]() |
![]() |
#6 |
Experienced Member
Last Online: Today 00:14
Join Date: Jun 2007
Location: L/H side
|
![]()
possibly the master cylinder then , the secondary circuit comes in at about 50% travel so you should be able to stop . has the brake fluid been changed every 2 years ? It should be fairly clear with a yellow tint . does it still go down if you keep a gentle but constant pressure on the pedal ?
__________________
|
![]() |
![]() |
![]() |
#7 |
Premier Member
Last Online: Dec 29th, 2013 12:08
Join Date: Apr 2011
Location: Berkhamsted
|
![]()
Also check the pipes around the brake master assist cylinder, the hose might be leaking or indeed the brake assist diaphram meaning you don't have the most effective brakes - what car is it as if its a diesel it might be something to do with the vacuum pump.
|
![]() |
![]() |
![]() |
#8 |
Experienced Member
Last Online: Today 00:14
Join Date: Jun 2007
Location: L/H side
|
![]()
if it is the vacuum pump the pedal will feel rock hard with no travel and you have to push 4 times harder , the diesel and auto petrols have a vacuum pump .
__________________
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|