|
400 Series General Forum for the Volvo 440, 460 and 480 cars |
Information |
|
440 turbo AFR guageViews : 763 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 10th, 2009, 09:18 | #1 |
the stealth brick
|
440 turbo AFR guage
Looking to fit an AFR guage and wanted to know which is the signal wire coming from the lambda sensor back at the ECU
Regards Kevin |
Aug 10th, 2009, 11:33 | #2 |
Experienced Member
Last Online: Yesterday 22:55
Join Date: Jun 2007
Location: L/H side
|
you wont get much of a useful reading from this signal it will just vary all the time up and down about twice a second from weak to rich and will be meaningless ...
__________________
My comments are only based on my opinions and vast experience . |
Aug 10th, 2009, 12:22 | #3 |
New Member
Last Online: Aug 24th, 2011 21:42
Join Date: Jul 2009
Location: hastings
|
you need 2 tap into the black wire from the sensor using a wire tap which are cheap 2 buy and they only jump alot if using a 1-2 wire sensor (non-heated) or if you have a narrow band gauge with a wide band sensor
|
Aug 11th, 2009, 17:37 | #4 |
the stealth brick
|
Thanks for the info, all wired in and managed to have a look at the ECU but cannot find a black wire going to it, would it have changed in the wiring harness, dont fancy taking the ECU from its mounting to look at the pin number to find it. A bit tight getting in there.
Regards Kevin |
Aug 11th, 2009, 23:39 | #5 |
New Member
Last Online: Aug 24th, 2011 21:42
Join Date: Jul 2009
Location: hastings
|
dont go from ecu go from the sensor as its much easier to find plus you dont want 2 to damge any other wires which your more likely to do the closer you are to the ecu
|
The Following User Says Thank You to blaze For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|