|
Towing and Caravan Topics A forum for all towing/caravanning related topics |
Information |
|
V50 R-Design Towbar NO Bumper CutViews : 9206 Replies : 11Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 16th, 2012, 21:29 | #1 |
New Member
Last Online: Dec 2nd, 2014 14:15
Join Date: Feb 2008
Location: Selby
|
V50 R-Design Towbar NO Bumper Cut
Picked up my Red 2010 V50 R-Design a couple of weeks back and wanted a tow bar with no bumper cut and specific electrics. Searched for pictures and a straight answer and struggled to find one so here for all who are looking too..
I got a Witter swan neck detachable from ebay for £179, the electrics £81 for genuine Volvo module, fuse, 13 pin wire with plugs and finally £56 labour and software from Volvo dealer. No bumper cut on V50 R-Design and electrics took up out of the way, but need to be fixed at a angle, they just clear bottom edge of bumper when you pull them down. Fitted it myself in less than 1.5 hour, hour for the tow bar and half hour for electrics. No need to remove interior trim in boot for electrics like it says in the Volvo instructions, I managed to do it through the access cover for the rear bulb changing, the two plugs on the loom are taped up just below this on the right, can't miss them. When you have the bumper off you can pull the rear vent cover off above the rubber grommet and feed the wire up easily. The hardest bit was getting the plugs through the grommet. I had quotes for supply and fit ranging from £480 to £635, Joke! Volvo electrics worked out cheaper all in than other car specific electric kits too. The electrics will not work without the software installed first. Hope this helps |
The Following 2 Users Say Thank You to foxyloxey For This Useful Post: |
Oct 7th, 2012, 17:26 | #2 |
New Member
Last Online: Jan 14th, 2020 00:44
Join Date: Oct 2012
Location: Sacramento, California
|
FoxeyLoxey,
Thanks so much for your post. I purchased my V50 r-design back in May 2012 and I have had the same issues with lack of available information regarding towing options. Had ordered a Curtis hitch from a local specialist who had promised that there was a no cut solution. On installation he says he has to cut the bumper :-( (I cancelled the job before damage was done). Q: How far does the mount extend below your bumper when the swan neck is installed? Do you have a parts number? Thanks in Advance! |
Oct 7th, 2012, 18:59 | #3 |
Forum Support Team
Last Online: Yesterday 22:12
Join Date: Mar 2006
Location: Deep in Makem territory
|
Very tidy
__________________
Current 04 S80 D5 SE Auto 03 S80 D5 SE Man Previous Volvos 90 240 GL B230FB Auto 96 940 CD 13 V40 D2 R-design 89 745 GLE 98 V90 3.0 24v 98 945 Celebration Auto 96 965 SE Auto 86 744 GL 81 244 DL |
Oct 9th, 2012, 23:44 | #4 | |
Premier Member
Last Online: Nov 20th, 2018 01:45
Join Date: Feb 2009
Location: Dallas, Texas
|
Quote:
I installed the North American Volvo hitch on my V70 and made a cut on the bottom of the bumper cover. The square end of the receiver is in this cut and it does not look hacked up.
__________________
2004 V70 2.4 petrol 170 5-spd auto (lost 2016 June, collision with deer) 2007 XC90 FWD 3.2 petrol 6-spd auto Last edited by Jim314; Oct 10th, 2012 at 00:53. Reason: typo |
|
Apr 1st, 2014, 16:10 | #5 |
New Member
Last Online: Apr 11th, 2014 19:55
Join Date: Apr 2014
Location: Lymm
|
V50 towbar on an R model
Hi Foxyloxey
I have just seen your post re the V50 tow bar and want to do the same. Can you tell me where you get the software from and how do you install it. Thanks for a helpful post. Geoff |
Apr 1st, 2014, 18:32 | #6 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
the software is Dealer only.
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
Jun 3rd, 2014, 14:13 | #7 |
New Member
Last Online: Aug 22nd, 2023 15:59
Join Date: Feb 2012
Location: bristol
|
Resurrecting this thread in the hope that foxyloxey can remember where to get the genuine Volvo electrics kit for £81?
I am considering options for fitting a towbar to a 2006 sport model. Probably a Witter detachable (VL44q or VL48QF) with an after market bypass-rely wiring kit (around £20 for a PCT Logicon ZR2500). I would prefer the genuine Volvo wiring kit but it is more than £180 plus software and labour. 31346058 13 pin terminal 31407108 tow bar control module 8698479 VIDA Software install Anyone have any better options? |
Jun 3rd, 2014, 15:47 | #8 |
New Member
Last Online: Aug 22nd, 2023 15:59
Join Date: Feb 2012
Location: bristol
|
Ok so I've looked around and found a dealer that does the following electrics:
13 Pin wiring kit 31414907 £38.41 Trailer module 31407108 £52.51 Then I would just need the software which I believe can be done using my grey-market DICE & a cheap (£27) one day VIDA subscription from http://tis.volvocars.biz/ and buy the towing module software (£20). Although I haven't done this before so it would mean more time setting up and learning the process which from what I have read means buying the update from a Volvo dealer and using VIDA to find/download and install the purchased software. Hardly seems worth it unless there are any other software updates that are worth having? |
Jun 9th, 2014, 23:24 | #9 |
New Member
Last Online: Aug 22nd, 2023 15:59
Join Date: Feb 2012
Location: bristol
|
Just completed an entire DIY towbar fit on my MY06 Volvo V50 Sport SE so I thought I would give an update for anyone looking for info.
I purchased the following which will fit all models including sport and r-design. All prices includes VAT and delivery:
No need to take the boot apart to plug the trailer module into the CAN bus; everything can be done just by taking off the rear bumper. So a couple of hours fitting the bar and electrics and a couple of days trying to convince a Volvo dealer to order your software. £240.85 all in and no time spent buzzing out a hacked up wiring loom. |
The Following 3 Users Say Thank You to scubasteve For This Useful Post: |
Jan 26th, 2018, 09:57 | #10 | |
New Member
Last Online: Jan 26th, 2018 09:57
Join Date: Jan 2018
Location: Colwyn Bay
|
v50 "08" 2.4 D5 tow bar
Quote:
Scubasteve. Thanks for finding out all the above. Q I don't have a great deal of IT experience would you recommend a novice with club hammer fingers attempting to do the software update? last time I fitted a tow bar to my old S60 2.4 D5 (07), I had to buy a module and just plugged it in and all worked great. |
|
Tags |
bumper cut, detachable, r design, towbar, v50 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|