|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
BCM-0134 Code s40Views : 673 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 21st, 2020, 01:21 | #1 |
New Member
Last Online: Nov 29th, 2020 23:47
Join Date: Nov 2020
Location: Norwich
|
BCM-0134 Code s40
Helllo. Tonight I've found a naughty little bcm-0134 code on my 2006 1.8 petrol s40. Had the anti skid service light on for a while now, reduced power and a tad thirsty. May not be related symptoms but hoping so. 0134 is brake pressure sensor offset fault. Can anyone shed a little light as to how I could fix this from home? Do I need to get another abs module or is there a way I can replace the old sensor with a new one? Or....does it need a good clean?
Thanks! Last edited by AJNR; Nov 21st, 2020 at 02:15. |
Nov 21st, 2020, 23:35 | #2 |
Member
Last Online: Jul 3rd, 2024 10:42
Join Date: Jun 2019
Location: Havant
|
The fault is with pressure sensor on the pump. I had this on mine. You can separate the module and reuse with another puump. Just be aware that abs module is part of immobilzer. If you use used pump just swap the pump not the electronic module. The sensor is on the pump.
|
The Following User Says Thank You to ele288 For This Useful Post: |
Tags |
abs anti-skid, anti skid mode, bcm-0134, brake pressure sensor, s40 1.8 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|