|
![]() |
|
Wanted 940 dampersViews : 627 Replies : 6Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Last Online: Jul 25th, 2024 08:38
Join Date: Sep 2017
Location: London
|
![]()
Look some bilstein or something similar
|
![]() |
![]() |
![]() |
#2 |
Premier Member
Last Online: Yesterday 20:49
Join Date: Jul 2012
Location: Lenzie
|
![]()
__________________
V70 D5 SE Geartronic 215bhp Saville Grey 2012MY 940 LPT Manual 1996 740 SE 1990 |
![]() |
![]() |
The Following User Says Thank You to griston64 For This Useful Post: |
![]() |
#3 |
Master Member
Last Online: Jul 27th, 2024 12:02
Join Date: Apr 2014
Location: Stroud
|
![]()
If its rears you want I did a KYB conversion on mine and a few customers cars and have never had a complaint! Just remember that the stud for the spring mount is part expired now so you would need to make your own out of a standard stud if you change the springs at the same time, the top rubber spring seats and washers are now part expired too. I literally had the last a few weeks back, so be careful when you strip it down.
|
![]() |
![]() |
![]() |
#4 | |
Premier Member
Last Online: Yesterday 20:49
Join Date: Jul 2012
Location: Lenzie
|
![]() Quote:
I did manage to heat up the old ones to remove nut and they cleaned up reasonably well I think Jim ( on forum ) may jave also got them from Brookhouse the other day
__________________
V70 D5 SE Geartronic 215bhp Saville Grey 2012MY 940 LPT Manual 1996 740 SE 1990 Last edited by griston64; Jun 10th, 2022 at 08:46. |
|
![]() |
![]() |
![]() |
#5 |
Premier Member
Last Online: Yesterday 22:52
Join Date: Sep 2021
Location: Stowmarket
|
![]()
Ditto to Griston64’s suggestion for Bilstein B4’s
Got front and rear as the link indicated a couple of months ago, fitted rears and ride quality is very good, still got fronts to fit in refurbished front struts, when I get time……/ Also the suggestion to source new top fixing stud and nut is worthwhile, mine were rusted solid. Cheers Steve |
![]() |
![]() |
![]() |
#6 |
VOC Member
Last Online: Jul 28th, 2024 19:15
Join Date: Dec 2006
Location: stoke on trent
|
![]()
hi i got the spring stud and nut from brook house volvo the other day .the nut is not the deep original one its a standard flanged nut but sure it will fit i may need to cut the stud down a little bit or get a deep 15mm socket i think
regards jim |
![]() |
![]() |
![]() |
#7 |
Master Member
Last Online: Jul 27th, 2024 12:02
Join Date: Apr 2014
Location: Stroud
|
![]()
Don’t cut it Jim, if you do you will struggle with fitting. Do you want a pair of original nuts? I have a brand new pair I bought for a customers car but for some reason didn’t fit.
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|